Heavy Duty, Commercial Quality Heating/Cooling Controller for Aquariums, Etc.

In stock

This is a heavy duty heating/cooling controller for your large aquarium or water circulation project fabricated by Bear Valley Aquatics.


  • Available in 1200 watt or 1800 watt versions.
  • Custom sizes including 230 volt models are available.
  • Power controlled by oversized independent contactor. By oversizing the contactor, this unit is suitable for both resistive (heating) and inductive (motor) loads.
  • The controller can be used control a small pump and heater for a custom recirculation system.
  • The temperature relay can be set for heating or cooling mode, allowing it to control a heater element or small chiller.
  • No heating element or chiller is included with the controller, but you can optionally add a heater element to the order.
  • Sensor probe is water proof with a stainless steel head. Approximately 6 feet in length.
  • Includes supplementary circuit breaker.
  • Standard units come with three prong plug for standard US receptacles.
  • Enclosure is rated for IP65 and is completely non-metallic.
  • Bright LED panel indicator shows when the controller is actively heating or cooling. Unit is bench tested prior to shipping and is preset to approximately 77°F.
  • Available with UL 489 circuit breaker when primary branch circuit protection is required.
  • All components are completely replaceable and upgradable.
  • Custom configurations are available including the addition or flow or level sensors.
  • 6 month warranty on components only.
Write Your Own Review
You're reviewing:Heavy Duty, Commercial Quality Heating/Cooling Controller for Aquariums, Etc.
Your Rating
Copyright © 2020-Bear Valley Aquatics. All rights reserved.